Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
- 12. A body
   12.1. Maintenance service and repair
   12.2. Vinyl furnish
   12.3. An upholstery and rugs
   12.4. Repair of small scratches
   12.5. Repair of dents
   12.6. Repairing of apertures from a rust or dents
   12.7. Filling and painting
   12.8. Repair of considerable damages
   12.9. Loops and locks
   12.10. A windscreen and motionless glasses
   12.11. Removal and installation of doors
   12.12. Door adjustment
   12.13. Removal and cowl installation
   12.14. Cowl adjustment
   12.15. A cover of a back compartment
   12.16. Bumpers
   12.17. A forward facing lattice
   12.18. External mirrors
   12.19. The forward aerial
   12.20. Removal and installation covered
   12.21. Body support (fastening to the chassis)
   12.22. The hatch
   12.23. The holder of a spare wheel
   + 12.24. The salon equipment
   12.25. Internal panels of doors
   12.26. Facing panels of salon
   12.27. A ceiling upholstery
   12.28. The door-lock switch
   + 12.29. Door glass, стеклоподъемник and the electric motor стеклоподъемника
   12.30. A windscreen
   12.31. Back glass
   12.32. Внутрисалонное a rear-view mirror
   - 12.33. Seats
      12.33.1. Forward seats
      12.33.2. Back seats and backs of seats
   12.34. Seat belts
+ 13. An electric equipment
+ 14. Electroschemes


ccf2698e



12.33.2. Back seats and backs of seats

THE GENERAL DATA

Typical design of the second seat

1. A headrest

2. A seat

3. A clamp

The third seat (1992-98)

1. A headrest

2. The buffer

3, 4. Covers of fastening of a seat to a body

5. A seat

6. A clamp

PERFORMANCE ORDER
1. Disconnect from a floor an arm of a back seat (on a 2-door body) or a seat sled (on a 4-door body).
2. If necessary displace a seat.
3. Remove an overlay from the mechanism откидывания backs, turn away 2 bolts and remove a back (bolts of a regulator of a seat not to turn on).
4. Remove a seat.
5. Installation is carried out upside-down.
6. Back bolts tighten with the moment 52 Н.м. Fastening bolts to a floor tighten according to the demanded moments.