Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
- 11. Brake system
11.1. Technical characteristics
11.2. The vacuum amplifier of brakes
11.3. Adjustment of brakes
11.4. The switch of a signal of braking
11.5. Removal and pedal installation
11.6. The main cylinder of brakes
11.7. The dosing out valve
11.8. A regulator of pressure of back brakes (1992-98)
11.9. The control valve of the amplifier of brakes
11.10. Hoses and tubes
11.11. Removal of air from a hydrodrive of brakes
+ 11.12. Forward disk brakes
+ 11.13. Back drum-type brakes
+ 11.14. Back disk brakes (1992-98)
+ 11.15. A manual brake
11.16. Antiblocking system (ABS)
11.17. The hydromodule
11.18. The overload gauge
11.19. The gauge of speed
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes
|
| Internal diameter of the main cylinder (mm): |
| – а/м 1983-84 |
22,098
|
| – а/м 1985-87 |
22,225
|
| – а/м 1988-98 |
23,83
|
| Brake disk |
| Thickness of a new disk (mm): |
| – а/м 1983-86 |
20,066
|
| – а/м 1987-91 |
22,00
|
| – а/м 1992-98: |
| • lobbies |
23,90
|
| • the back |
18,03
|
| Residual thickness (mm): |
| – а/м 1983-86 |
18,29
|
| – а/м 1987-91 |
20,39
|
| – а/м 1992-98: |
| • lobbies |
22,35
|
| • the back |
8,38
|
| Palpation, no more (mm): |
| – To 1991 incl. |
0,15
|
| – Since 1992 |
0,075
|
| Drums of back brakes (drum polishing is supposed only for ovality elimination, at reduction of diameter after polishing below norm the drum is subject to replacement) (mm): |
| – Internal diameter of a new drum |
254,0 (till 1991 incl.)
|
| – The limiting: |
| • to 1991 incl. |
256,0 mm
|
| • since 1992 |
198,1 mm
|
|
|
