Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
- 12. A body
   12.1. Maintenance service and repair
   12.2. Vinyl furnish
   12.3. An upholstery and rugs
   12.4. Repair of small scratches
   12.5. Repair of dents
   12.6. Repairing of apertures from a rust or dents
   12.7. Filling and painting
   12.8. Repair of considerable damages
   12.9. Loops and locks
   12.10. A windscreen and motionless glasses
   12.11. Removal and installation of doors
   12.12. Door adjustment
   12.13. Removal and cowl installation
   12.14. Cowl adjustment
   12.15. A cover of a back compartment
   12.16. Bumpers
   12.17. A forward facing lattice
   12.18. External mirrors
   12.19. The forward aerial
   12.20. Removal and installation covered
   12.21. Body support (fastening to the chassis)
   12.22. The hatch
   12.23. The holder of a spare wheel
   + 12.24. The salon equipment
   12.25. Internal panels of doors
   12.26. Facing panels of salon
   12.27. A ceiling upholstery
   12.28. The door-lock switch
   + 12.29. Door glass, стеклоподъемник and the electric motor стеклоподъемника
   12.30. A windscreen
   12.31. Back glass
   12.32. Внутрисалонное a rear-view mirror
   + 12.33. Seats
   12.34. Seat belts
+ 13. An electric equipment
+ 14. Electroschemes

12.11. Removal and installation of doors

THE GENERAL DATA

Forward (above) and back doors


1. A socket 2. A pin 3. A door 4, 5. Loops 6. A clamp	7. An adjusting plate 8. A switch cap 9. Trailer the switch 10. The terminator

Removal and installation

FORWARD DOORS

PERFORMANCE ORDER

1. Remove doorway facing.
2. For access to wires remove the facing panel of a forward mudguard.
3. Disconnect all wires conducting to a door, and take aside.
4. Establish under a door a prop and outline contours of loops.
5. Remove overlays of loops, remove a small pin of the terminator of a door.
	6. Turn away bolts of fastening of loops to a door (the assistant should keep thus a door).
7. Together cautiously remove a door, not supposing loss of adjusting plates under loops. Remember number and an arrangement of plates on each of loops.
8. Installation is carried out upside-down.
9. Establish a door on the outlined contours, establish plates in a former order.
10. Tighten fastenings according to the demanded moments.
11. Adjust a door (subsection 12.12 see).

BACK DOORS

PERFORMANCE ORDER

1. Remove an overlay порожка.
2. Remove an overlay of an average rack.
3. Disconnect all wires conducting from a rack to a door, and take aside.
4. Establish under a door a prop and outline contours of loops.
5. Remove a small pin of the terminator of a door.
6. Turn away bolts of fastening of loops to a door (the assistant should keep thus a door), together cautiously remove a door.
7. Installation is carried out upside-down.
8. Establish a door on the outlined contours.
9. Tighten fastenings according to the demanded moments.
10. Adjust a door (subsection 12.12 see).