Mitsubishi Pajero

1982-1998 of release

Repair and car operation


Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
- 12. A body
   12.1. Maintenance service and repair
   12.2. Vinyl furnish
   12.3. An upholstery and rugs
   12.4. Repair of small scratches
   12.5. Repair of dents
   12.6. Repairing of apertures from a rust or dents
   12.7. Filling and painting
   12.8. Repair of considerable damages
   12.9. Loops and locks
   12.10. A windscreen and motionless glasses
   12.11. Removal and installation of doors
   12.12. Door adjustment
   12.13. Removal and cowl installation
   12.14. Cowl adjustment
   12.15. A cover of a back compartment
   12.16. Bumpers
   12.17. A forward facing lattice
   12.18. External mirrors
   12.19. The forward aerial
   12.20. Removal and installation covered
   12.21. Body support (fastening to the chassis)
   12.22. The hatch
   12.23. The holder of a spare wheel
   + 12.24. The salon equipment
   12.25. Internal panels of doors
   12.26. Facing panels of salon
   12.27. A ceiling upholstery
   12.28. The door-lock switch
   + 12.29. Door glass, стеклоподъемник and the electric motor стеклоподъемника
   12.30. A windscreen
   12.31. Back glass
   12.32. Внутрисалонное a rear-view mirror
   + 12.33. Seats
   12.34. Seat belts
+ 13. An electric equipment
+ 14. Electroschemes




ccf2698e

12.6. Repairing of apertures from a rust or dents
PERFORMANCE ORDER
1. Remove all paint from the damaged surface and from surrounding metal in radius approximately 2,5 sm, having taken advantage of an emery paper or the wire brush, put on a drill.
2. If they are inaccessible, this work can be made manually by means of several sheets of an emery paper.
3. Having removed a paint, you can define degree of corrosion and solve, whether replace the whole panel or if it is possible, to repair the damaged surface. New panels of a body are not too expensive, as many people think, and very often much faster to establish the new panel, than to repair the big surface damaged by a rust.
4. Remove all parts of decorative furnish from the damaged area, except for what operate as the directing initial form of the damaged body of the car, such as the headlight case, and so on.
5. Having taken advantage of scissors on metal or ножовочным a cloth, remove all damaged metal, and also any other metal on which there are rust traces.
6. A hammer bend aperture edges inside to create small dredging for a filling material.
7. A wire brush smooth out the damaged surface to remove порошкообразную a rust from a metal surface. If there is an access to a back part of a rusty surface, cover with its anticorrosive paint.
8. Before definitive заделкой закупорьте in any way an aperture. It can be made by means of a tin, приклепанной or screwed in in an aperture, or establish in an aperture a wire grid.
9. When the aperture will be corked, the damaged area can be filled and painted over (subsection 12.7) see.