Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
- 12. A body
   12.1. Maintenance service and repair
   12.2. Vinyl furnish
   12.3. An upholstery and rugs
   12.4. Repair of small scratches
   12.5. Repair of dents
   12.6. Repairing of apertures from a rust or dents
   12.7. Filling and painting
   12.8. Repair of considerable damages
   12.9. Loops and locks
   12.10. A windscreen and motionless glasses
   12.11. Removal and installation of doors
   12.12. Door adjustment
   12.13. Removal and cowl installation
   12.14. Cowl adjustment
   12.15. A cover of a back compartment
   12.16. Bumpers
   12.17. A forward facing lattice
   12.18. External mirrors
   12.19. The forward aerial
   12.20. Removal and installation covered
   12.21. Body support (fastening to the chassis)
   12.22. The hatch
   12.23. The holder of a spare wheel
   + 12.24. The salon equipment
   12.25. Internal panels of doors
   12.26. Facing panels of salon
   12.27. A ceiling upholstery
   12.28. The door-lock switch
   + 12.29. Door glass, стеклоподъемник and the electric motor стеклоподъемника
   12.30. A windscreen
   12.31. Back glass
   12.32. Внутрисалонное a rear-view mirror
   + 12.33. Seats
   12.34. Seat belts
+ 13. An electric equipment
+ 14. Electroschemes


ccf2698e



12.16. Bumpers

THE GENERAL DATA

Forward bumper

1. A towing cross-beam
2. Facing
3. The gauge of temperature of air
4. A bumper

Back bumper

1. Lanterns of a signal of a backing
2. A bumper

Removal and installation

PERFORMANCE ORDER
1. At removal of a forward bumper remove the bottom cross-beam for towing, having turned on 4 (or 5) a bolt.
2. Turn away 5 nuts of fastening of forward facing of a bumper (access to these nuts is provided from the interior of a bumper) and remove facing.
3. On a part of cars remove the gauge of temperature of air.
4. Establish under a prop bumper, turn away fastening bolts (4 bolts on forward and 8 or 10 bolts on a back bumper), with the assistant remove a bumper, considering considerable weight of this detail.
5. Installation is carried out upside-down.
6. Tighten fastenings according to the demanded moments.