| 1. Release bolts of loops and move the closed cowl before alignment of a backlash with wings and a partition. |
| 2. Open a cowl and level definitively. |
| 3. Tighten bolts with the moment 14 Н.м. |
| 4. Check up operation of the lock of a cowl. The lock should open at small effort to the handle. |
|
5. If necessary adjust lock and latch position, moving them at the released bolts of fastening. |
|
6. Adjust cowl height (the cowl surface should be заподлицо with wings), rotating buffers – terminators. |
|
7. Expose буферы so that to sustain the size of 27 mm (1 – a cowl, 2 – the buffer). |
| 8. After adjustment on height again adjust lock position. |
| 9. After the termination check up an inhaling of all bolts and fastening nuts. |
