Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
- 11. Brake system
   11.1. Technical characteristics
   11.2. The vacuum amplifier of brakes
   11.3. Adjustment of brakes
   11.4. The switch of a signal of braking
   11.5. Removal and pedal installation
   11.6. The main cylinder of brakes
   11.7. The dosing out valve
   11.8. A regulator of pressure of back brakes (1992-98)
   11.9. The control valve of the amplifier of brakes
   11.10. Hoses and tubes
   11.11. Removal of air from a hydrodrive of brakes
   + 11.12. Forward disk brakes
   + 11.13. Back drum-type brakes
   - 11.14. Back disk brakes (1992-98)
      11.14.1. Replacement колодок
      11.14.2. A brake support
      11.14.3. A disk of a back brake
   + 11.15. A manual brake
   11.16. Antiblocking system (ABS)
   11.17. The hydromodule
   11.18. The overload gauge
   11.19. The gauge of speed
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes




ccf2698e

11.14.3. A disk of a back brake

Removal and installation

PERFORMANCE ORDER
1. Lift a back part of the car and remove a wheel.
2. Remove a support with an arm and колодками, fix a support.
3. Remove a support arm.
4. Designate disk position, turn away bolts and nuts and remove a disk.
5. Assemblage is carried out upside-down.

Condition check

PERFORMANCE ORDER
1. At detection of strong damages (выкрашивания, задиров, the strong development, the raised roughness of a surface) or in case of the raised palpation a disk replace.
2. The disk also varies, if its thickness in any point less maximum permissible.
3. Check up disk palpation for 1 turn, having established an indicator leg in 15 mm from disk edge (the support and колодки thus should be removed). Palpation should not exceed 0,15 mm.