Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
- 11. Brake system
   11.1. Technical characteristics
   11.2. The vacuum amplifier of brakes
   11.3. Adjustment of brakes
   11.4. The switch of a signal of braking
   11.5. Removal and pedal installation
   11.6. The main cylinder of brakes
   11.7. The dosing out valve
   11.8. A regulator of pressure of back brakes (1992-98)
   11.9. The control valve of the amplifier of brakes
   11.10. Hoses and tubes
   11.11. Removal of air from a hydrodrive of brakes
   + 11.12. Forward disk brakes
   + 11.13. Back drum-type brakes
   + 11.14. Back disk brakes (1992-98)
   + 11.15. A manual brake
   11.16. Antiblocking system (ABS)
   11.17. The hydromodule
   11.18. The overload gauge
   11.19. The gauge of speed
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes

11.17. The hydromodule

THE GENERAL DATA

The ABS-system hydromodule

1. An arm of the block of the relay

2. A tube

3. A module arm

4. The module

5. A cover of the block of the relay

6. The relay of valves

7. The relay of the electric motor of the pump

The hydromodule is mounted in a motor compartment on the right mudguard, near to a partition.

Removal and installation

PERFORMANCE ORDER

1. Disconnect the battery from weight.

2. Merge a liquid from a hydrodrive of brakes.

3. Turn away screws and remove the top arm of sockets and the relay block.

4. Turn on the union, disconnect and immediately muffle 5 tubes.

5. Disconnect from the module sockets.

6. Turn away bolts and remove the module with an arm, considering considerable weight of the unit.

7. Remove a cover of the block of the relay, the relay of valves and the pump electric motor. The further dismantling of the module is forbidden.

8. Installation is carried out upside-down.

9. The union of tubes tighten with the moment 15 Н.м.

10. Remove air from a hydrodrive.

11. Check up system work in car-care centre.