Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
- 11. Brake system
   11.1. Technical characteristics
   11.2. The vacuum amplifier of brakes
   11.3. Adjustment of brakes
   11.4. The switch of a signal of braking
   11.5. Removal and pedal installation
   11.6. The main cylinder of brakes
   11.7. The dosing out valve
   11.8. A regulator of pressure of back brakes (1992-98)
   11.9. The control valve of the amplifier of brakes
   11.10. Hoses and tubes
   11.11. Removal of air from a hydrodrive of brakes
   + 11.12. Forward disk brakes
   + 11.13. Back drum-type brakes
   + 11.14. Back disk brakes (1992-98)
   + 11.15. A manual brake
   11.16. Antiblocking system (ABS)
   11.17. The hydromodule
   11.18. The overload gauge
   11.19. The gauge of speed
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes


ccf2698e Fullz



11.5. Removal and pedal installation

THE GENERAL DATA

Pedal of a brake (1983-86)

1. The plug
2. An arm
3. The switch
4. Draught
5. A spring
6. A pedal (МКПП)
7. A pedal (АКПП)

Pedal of a brake (1987-98)

1. The switch
2. A spring
3, 6. Шплинт
4, 7. A washer
5. An axis
8. A cable
10. A pedal
11. The plug
12. Распорная the plug
М/Т – for МКПП
А/Т – for АКПП
A.Smazat

PERFORMANCE ORDER
1. Disconnect the battery from weight, remove the switch of a signal of braking, disconnect a pedal spring.
2. Расшплинтуйте also remove a pedal axis.
3. Расшплинтуйте also disconnect a cable from transmission (on а/м with АКПП).
4. Turn away a nut, get a bolt and remove a pedal, if necessary remove plugs.
5. Installation is carried out upside-down. Adjust a pedal and the switch (subsection 11.3 see).
6. Tighten all connections according to the demanded moments.
7. Adjust a pedal and the switch.