Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
- 9. A running part
   + 9.1. A mechanical transmission
   + 9.2. Coupling
   - 9.3. Automatic transmission
      9.3.1. Adjustments
      - 9.3.2. The blocking switch Switch adjustment
      9.3.3. Check of adjustment of a cable of management by transmission
      9.3.4. The mechanism of management of transmission
      9.3.5. A shaft epiploon картера transmissions
      9.3.6. Removal and transmission installation
      9.3.7. A distributing box
      9.3.8. Forward and back epiploons
      + 9.3.9. Forward карданный a shaft and крестовины
      + 9.3.10. Back карданный a shaft and крестовины
      9.3.11. A forward leading axis
      9.3.12. A nave with a manual unblocking
      9.3.13. A nave with an automatic unblocking
      9.3.14. Forward semiaxes and epiploons of a forward axis
      9.3.15. A reducer of a forward axis
      9.3.16. Dismantling of SHRUS
   + 9.4. The back bridge
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes

ccf2698e Switch adjustment

CARS 1983-86

1. Translate the selector in position N, tighten screws of fastening and check up chain presence between switch BY-BY conclusions (1 – a starting position, 2 – sector of isolation of contacts, 3 – the probe, 4 – to a forward part of the car).
2. Move the switch in both parties and establish in position in which the ohmmeter will show a chain.
3. Move the switch so that between it and the backlash of 1,5 mm was the selector, tighten screws.

CARS 1987-89

1. Release screws of fastening and establish the selector so that position of the probe (2) on the draught termination corresponded neutral (1).
2. Check up chain presence between conclusions of a socket of the switch 2-BY and 2-BY, moving the switch.
3. Designate arm position.
4. Establish a backlash of 2,5 mm between the switch and a guard of the lever and tighten screws.

CARS 1990-98

Adjustment of position of the switch

1. Translate the selector in position N, tighten screws.
2. Release a counternut of a tip of a cable on the left side картера transmissions.
3. Release a bolt of fastening of the switch.
4. Having turned the switch, combine ledges (2) on the switch with the lever (1) fixing neutral position (3 – the lever of fixing of neutral position V4AW2).
5. Tighten a bolt with the moment 6 Н.м.
6. Submit a cable in a direction of an arrow and tighten a nut with the moment 24 Н.м. (1 – an adjusting nut; 2 – a cable).
7. Be convinced. That the selector is in position N.
8. Translate the selector in all positions and check up its fixing.