Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
- 9. A running part
   + 9.1. A mechanical transmission
   + 9.2. Coupling
   - 9.3. Automatic transmission
      9.3.1. Adjustments
      + 9.3.2. The blocking switch
      9.3.3. Check of adjustment of a cable of management by transmission
      9.3.4. The mechanism of management of transmission
      9.3.5. A shaft epiploon картера transmissions
      9.3.6. Removal and transmission installation
      9.3.7. A distributing box
      9.3.8. Forward and back epiploons
      + 9.3.9. Forward карданный a shaft and крестовины
      + 9.3.10. Back карданный a shaft and крестовины
      9.3.11. A forward leading axis
      9.3.12. A nave with a manual unblocking
      9.3.13. A nave with an automatic unblocking
      9.3.14. Forward semiaxes and epiploons of a forward axis
      9.3.15. A reducer of a forward axis
      9.3.16. Dismantling of SHRUS
   + 9.4. The back bridge
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes


ccf2698e



9.3.6. Removal and transmission installation

THE GENERAL DATA

Automatic transmission КМ148 (1987-89)

1. The handle
2. The panel
3. Шплинт
4. An axis
5. A cable throttle заслонки
6. A socket of the solenoidal
The valve of inclusion of the higher
Transfer (overdrive-valve)
7. A speedometer cable
8. A branch pipe for refuelling and check of level of a liquid
9. A ring
10. Back карданный a shaft
11. Forward карданный a shaft
12. A shaft of cross-section draught
13. Draught

Automatic transmission КМ148 (1987-89), continuation

14. A bolt of fastening of an exhaust pipe
15. Cooler tubes трансмиссионной liquids
16. An access cover to the hydrotransformer
17. Special bolts
18. A socket of the gauge of a control lamp of inclusion of a forward leading axis
19. An arm of an exhaust pipe
20. A cross-beam
21. An arm of a distributing box
22. The plug
23. Transmission in gathering with a distributing box

Automatic transmission V4AW2 (1990-98)

1. A branch pipe for refuelling and check of level of a liquid
2. A ring
3. A tip of a cable throttle заслонки
4. A dustproof cover
5. A cable of management of transmission
6. A speedometer cable
8. A socket of the switch of positions HIGH/LOW
9. A socket of the gauge of a control lamp of inclusion of a drive on all wheels
10. A socket of the gauge of work of interaxal differential in a blocking mode
11. A socket of the gauge of blocking of interaxal differential
12. A socket of the gauge of inclusion of a forward axis
13. A socket of the blocking switch
15. A cooler tube
A.Smazat liquid DIAMOND ATF SP or equivalent
N – is subject to replacement

Automatic transmission V4AW2 (1990-98), continuation

16. A starter
17, 18. A guard
19, 20. Arms
21. An access cover to
To the hydrotransformer
22. Торсион transmission support
23. An arm of a distributing box
24. A cross-beam
25. The buffer of a support of the engine
26. An arm of a guard of a distributing box
27. The buffer
28. A hydrotransformer bolt
29. Transmission in gathering with a distributing box
31. A lining
A.Oboznachenie of a bolt
B.Moment of an inhaling
V.Razmery of bolt L and D

Automatic transmission V4AW3 (1994-98)

1. A branch pipe for refuelling and check
Liquid level
2. A ring
3. A tip of a cable of the throttle
заслонки
4. A dustproof cover
5. A cable of management of transmission
7. A socket of the gauge of speed
8. A socket of the switch of positions
HIGH/LOW a distributing box
9. A socket of the gauge of a control lamp of inclusion of a drive on all wheels
10. A socket of the gauge of work of interaxal differential in a blocking mode
11. A socket of the gauge-detector of blocking of interaxal differential
12. A socket of the gauge-detector of inclusion of a forward axis
13. A socket of the blocking switch
14. A socket of the solenoidal valve
15. A cooler tube
A.Smazat liquid DIAMOND ATF SP or equivalent
N – is subject to replacement

Automatic transmission V4AW3 (1994-98), continuation


16. A starter
17, 18. A starter guard
24. A cross-beam
26. An arm of a back support
The engine
27. The buffer
28. A fastening bolt
The hydrotransformer
29. Transmission in gathering with a distributing box
30. The case of the mechanism of management of transmission
31. A lining
A.Oboznachenie of a bolt
B.Moment of an inhaling
V.Razmery of bolt L and D

CARS 1983-89

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a forward exhaust pipe, having disconnected from a collector and neutralizer.
3. Disconnect kick-down-draught.
4. Remove a cover of the selector and the selector panel, remove the selector.
5. Lift the car, remove a guard of a distributing box.
6. Remove the mechanism of change of transfers of transmission and management of a distributing box.
7. Merge from transmission a liquid.
8. Disconnect cooler tubes, muffle and fix in vertical position.
9. Disconnect карданные shaft.
10. Disconnect from transmission of a wire and cables.
11. Turn away bolts of fastening of the hydrotransformer for what remove a cover and turn коленвал, turning on bolts consistently.
12. Remove a starter, take aside and fix (it is recommended to disconnect at first wires).
13. Remove from a cross-beam a back support of transmission.
14. Remove a cross-beam, considering considerable weight and the sizes of this detail.
15. Remove a support of a distributing box, turn away fastening bolts колоколообразного картера and remove transmission, having displaced it back, having lowered and having removed with directing pins.
16. Installation is carried out upside-down.
17. Replace all linings and уплотнители, tighten connections with the moments specified in illustrations.
18. Bolts of fastening of the hydrotransformer to a flywheel tighten with the moment 35–42 Н.м.
19. Adjust draughts and cables.

CARS 1990-98

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove the mechanism of management of a distributing box.
3. Lift the car, remove a guard of a distributing box.
4. Remove a forward exhaust pipe, having disconnected from a collector and neutralizer.
5. Merge a liquid from transmission and oil from a distributing box.
6. Disconnect карданные shaft, having designated their position.
7. A forward shaft submit forward, incline and get from a reducer.
8. Remove a refuelling branch pipe.
9. Disconnect from draught transmission, remove from a shaft картера a cover.
10. Designate and disconnect from transmission of a wire and cables, including a speedometer cable.
11. Disconnect from transmission of a tube of a cooler.
12. Remove a starter and a thermal guard (if it is provided).
13. Substitute a jack under the engine pallet.
14. Substitute under transmission the cart with a jack, but transmission yet do not hang out.
15. Slightly will hang out the engine and remove the right and left forward support.
16. Remove the bottom cover колоколообразного картера.
17. Remove an arm of a distributing box, торсион, the buffer and a guard arm.
18. Slightly will hang out transmission.
19. Turn away 2 bolts of a cross-beam, lift a jack on 6 mm and remove a cross-beam.
20. Remove transmission. At removal execute the following.
21. Remove a cover
22. Turn away 6 bolts of fastening of the hydrotransformer, having asked the assistant to turn коленвал.
23. Cautiously lower a back part of transmission in gathering with a distributing box and remove from the engine.
24. Incline a forward part of transmission and cautiously lower, watching to touching a back extreme cross-beam, and get from under the car.
25. Installation is carried out upside-down.
26. Replace all linings and уплотнители, tighten connections with the moments specified in illustrations
27. Bolts of fastening of the hydrotransformer to a flywheel tighten with the moment 34–41 Н.м., bolts of fastening of transmission – with the moment 75 Н.м., cross-beam bolts – 6 Н.м.
28. Adjust drives of management of transmission.