Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
- 9. A running part
   + 9.1. A mechanical transmission
   + 9.2. Coupling
   - 9.3. Automatic transmission
      9.3.1. Adjustments
      + 9.3.2. The blocking switch
      9.3.3. Check of adjustment of a cable of management by transmission
      9.3.4. The mechanism of management of transmission
      9.3.5. A shaft epiploon картера transmissions
      9.3.6. Removal and transmission installation
      9.3.7. A distributing box
      9.3.8. Forward and back epiploons
      + 9.3.9. Forward карданный a shaft and крестовины
      + 9.3.10. Back карданный a shaft and крестовины
      9.3.11. A forward leading axis
      9.3.12. A nave with a manual unblocking
      9.3.13. A nave with an automatic unblocking
      9.3.14. Forward semiaxes and epiploons of a forward axis
      9.3.15. A reducer of a forward axis
      9.3.16. Dismantling of SHRUS
   + 9.4. The back bridge
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes


ccf2698e



9.3.12. A nave with a manual unblocking

THE GENERAL DATA

Nave of a forward wheel with manual blocking

1. A cap
2. A lining
3. Стопороное a ring
4. A washer
5. A forward brake
6. The blocking mechanism
7. A washer
8. A counternut
9. A nave

The device спупицы with manual blocking and its inclusion-deenergizing

1. The handle

2. A lead

3. Муфта

4. Полуось

5. A leading gear wheel of a semiaxis

6. A spring

Details of the mechanism of blocking of a nave

1. A cap
2. A lining
3. Муфта
4. A spring
5. A lead
6. A spring
7. The case
8, 10. A lock ring
9. A leading gear wheel
11. A ring gear wheel
12. A remote lining

Nave blocking is provided with handle switching in position LOCK that involves moving шлицевой муфты. In position FREE муфта descends with шлицов naves and the wheel rotates freely.

Dismantling and assemblage

CARS 1983-88

PERFORMANCE ORDER
1. Lift redock of the car and remove wheels.
2. Switch the handle in position FREE and turn away 6 bolts of fastening of a cap of a nave.
3. Remove a lock ring and remove washers.
4. Turn away 2 bolts and remove a forward brake, take aside and fix.
5. Turn away 6 bolts of fastening and remove a nave.
6. Remove муфту, a spiral spring, поводковое a ring and a spring ring.
7. The flat tool remove a lock ring in a back part of the case of a nave and get a conducted part of a nave.
8. Remove a lock ring and remove a conducted ring gear wheel, a remote lining and a leading gear wheel of a nave.
9. Assemblage is carried out upside-down.
10. Grease ring, leading and conducted gear wheels of a nave with greasing SAE J310А or NLGI N3.
11. At installation of the collected nave grease places of contact of the case of gear wheels and a nave with hermetic 3M ART N 8661 or N 8663 or equivalent (greasing places are specified by shading).
12. Tighten bolts of a nave with the moment 50–60 Н.м., a cap – 10–14 Н.м.