Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
- 3. Engines
   3.1. Candles
   3.2. Check of wires
   - 3.3. Ignition system
      3.3.1. Adjustments
      3.3.2. Check of the gauge of rotation коленвала
      3.3.3. The coil of ignition and additional резистр
      + 3.3.4. Replacement of details of system of ignition
      3.3.5. Ignition installation
      3.3.6. Adjustment of backlashes in valves
      3.3.7. Adjustment of turns of idling and quality of a mix
      3.3.8. Adjustment of structure of a mix
   + 3.4. Engine major repairs
   + 3.5. Diesel and турбодизельный engines of 2,5 and 2,8 l
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes


ccf2698e



3.3.2. Check of the gauge of rotation коленвала

THE GENERAL DATA

On the gauge there should be 2 pressure:

  – +12 In constant from the battery;
  – 5 In from the processor block, interrupted at distributor rotation.

PERFORMANCE ORDER
1. Check up the gauge on the car for what disconnect a socket, include ignition and check up presence of pressure 12 In between one of conclusions and weight (conclusions of the gauge to weight not to connect).
2. Switch off ignition.
3. Remove the distributor of ignition and attach a socket.
4. Cautiously remove isolation of wires to attach the voltmeter.
5. Connect the voltmeter to weight, include ignition and slowly turn the distributor platen.
6. At distributor turn on 1 on one of wires there should be a pressure 5 In, and on other wire this pressure should disappear and appear at distributor turn on 120 .
7. Check up a condition of a plate of a rotor.