Mitsubishi Pajero

1982-1998 of release

Repair and car operation


Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
- 10. A suspension bracket and a steering
   10.1. Wheels
   - 10.2. A forward suspension bracket
      10.2.1. Торсион
      10.2.2. The shock-absorber
      10.2.3. The top spherical support of a suspension bracket
      10.2.4. The bottom spherical support
      10.2.5. The stabilizer of cross-section stability
      10.2.6. The top lever of a suspension bracket
      10.2.7. The bottom lever of a suspension bracket and replacement of plugs
      10.2.8. A rotary fist
      10.2.9. The bearing of a forward wheel
      10.2.10. Corners of installation of wheels
   + 10.3. A back suspension bracket
   + 10.4. A steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes




ccf2698e

10.2.7. The bottom lever of a suspension bracket and replacement of plugs
THE GENERAL DATA

The bottom lever of a suspension bracket
1. The shock-absorber
2, 12. The lever торсиона
3. Торсион
4. A stabilizer bar
5. The buffer 		7. Шплинт
8. Шижняя a spherical support
11. A lever axis
13. The bottom lever

Removal and installation

PERFORMANCE ORDER
1. Lift car redock, remove a wheel and грязеотражатель.
2. Remove торсион in gathering with the lever (subsection 10.2.1 see).
3. Disconnect from the lever the shock-absorber and a stabilizer bar.
4. Расшплинтуйте a nut and выпрессуйте the bottom spherical support stripper МВ990809-01 or equivalent.
5. Turn away bolts of an axis and remove the lever.

Replacement procedure of plugs

PERFORMANCE ORDER
1. Adaptation MV990958-01 выпрессуйте plugs (at the left) from an arm of a frame and запрессуйте new (on the right). At removal of the left plug remove a reducer of a forward axis.
2. Adaptation MV990883-01 выпрессуйте plugs from the suspension bracket lever.
3. Moisten with a soap solution the new plug and запрессуйте. The plug should act equally from both parties.
4. Further establish the lever upside-down. A nut of a spherical support tighten with the moment 120–180 Н.м.
5. All connections tighten with the certain moments.