Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
- 10. A suspension bracket and a steering
   10.1. Wheels
   - 10.2. A forward suspension bracket
      10.2.1. Торсион
      10.2.2. The shock-absorber
      10.2.3. The top spherical support of a suspension bracket
      10.2.4. The bottom spherical support
      10.2.5. The stabilizer of cross-section stability
      10.2.6. The top lever of a suspension bracket
      10.2.7. The bottom lever of a suspension bracket and replacement of plugs
      10.2.8. A rotary fist
      10.2.9. The bearing of a forward wheel
      10.2.10. Corners of installation of wheels
   + 10.3. A back suspension bracket
   + 10.4. A steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes

10.2.3. The top spherical support of a suspension bracket

Check, removal and installation

PERFORMANCE ORDER

1. Remove the lever of a suspension bracket and check up the resistance moment проворачиванию support which should be 0,8–3,5 Н.м. Otherwise a support replace.
2. Lift redock of the car and remove a wheel.
3. Remove the top lever of a suspension bracket (subsection 10.2.6 see).
4. Remove a cover and remove a lock ring.
	5. By means of special equipment выпрессуйте a support from the lever (1 – the lever, 2 – a support).
6. Support installation is carried out upside-down.
	7. At assemblage combine a label on a support (1) with an axial line of the lever (2).
8. Запрессуйте a support by means of the same equipment.
9. Grease a support and fill a cover universal консистентной with greasing.
10. A support flute grease with type hermetic 3М ART 8663 and fix a cover a ring.
11. Прошприцуйте a support through a butterdish.
12. Adjust a road clearance (subsection 10.2.1 see) and corners of installation of wheels.