The lever of inclusion of screen wipers
|
|
1. ON – normal work of a screen wiper
2. OFF – it is switched off
3. INT – faltering work of a screen wiper
4. The handle |
Turn the handle on the lever to include a screen wiper of back glass.
The prevention Before muffling the engine, always switch off screen wipers and wait, while they will return to a starting position, especially at cold weather. If screen wipers not to return in парковочное position, and to leave on glass in case they will freeze to a windshield, the engine of screen wipers can be damaged at its following start.
Before inclusion of screen wipers in cold weather check up, that they have not frozen to a windshield. If to include screen wipers in such conditions, the engine of screen wipers can fuse.
Do not include screen wipers, when glass dry: they can scratch glass. It also can lead to premature deterioration of brushes.
Replace brushes of screen wipers when they will wear out that visibility of road to rainy weather did not decrease. Use brushes of the suitable size. If you have questions, address to experts.
If in an operating time the screen wiper is stopped by any obstacle, such, as ice or snow, can burn down the screen wiper engine even if to return the handle of inclusion of a screen wiper in position OFF. If it happens, stop the car and switch off ignition, then clear back glass that the screen wiper could work normally.
|
