Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
- 1.1. The instrument panel and control means
   1.2. Internal furnish
   + 1.3. Door-locks
   1.4. A bulk mouth of a fuel tank
   1.5. A cowl
   + 1.6. Windows
   + 1.7. The hatch
   + 1.8. Seats and seat belts
   + 1.9. A safety air cushion
   + 1.10. Devices and controls
   + 1.11. Start of the engine and a driving
   + 1.12. The ignition lock
   1.13. Anticreeping system
   1.14. The lock of a steering column
   1.15. Engine start in cold weather
   + 1.16. An automatic transmission
   + 1.17. A mechanical transmission
   1.18. A lay brake
   1.19. A brake pedal
   1.20. System of the hydraulic booster of brakes
   1.21. The sound signal warning about deterioration brake колодок
   1.22. System of antiblocking of brakes
   1.23. The lever of adjustment of height of a steering column
   1.24. System of a steering with hydraulic strengthening
   1.25. Rear-view mirrors
   1.26. Heaters of rear-view mirrors
   1.27. Cruise-control system
   1.28. Adjustment of volume and air direction
   1.29. The Heater / the conditioner
   1.30. The conditioner switch
   1.31. Salon heating
   1.32. Heating of a windscreen and glasses of doors
   - 1.33. In case of an emergency
      1.33.1. An arrangement of a spare wheel, a jack and tools in the car
      1.33.2. Поддомкрачивание the car
      1.33.3. Car lowering
      1.33.4. Wheel replacement
      1.33.5. Car towage
   1.34. Replacement of lamps
   1.35. Capacity of lamps
   + 1.36. Headlights of head light
   1.37. Lamps of illumination of back licence plate
   1.38. A lantern of illumination of a luggage carrier
   1.39. Lamps for reading of cards
   1.40. The top plafond
   1.41. The top lantern of a stoplight
   1.42. A portable lantern
   1.43. Safety locks
   + 1.44. Identification numbers and information tablets
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes

1.33. In case of an emergency

1.33.1. An arrangement of a spare wheel, a jack and tools in the car

THE GENERAL DATA

Arrangement of a spare wheel, jack and tools in the car

1. A spare wheel

2. Branch for tools

3. A jack

4. The jack handle

The jack and the jack handle are stored in branch for tools under a back seat.

Tools are stored in branch for tools on an outer side of a back door.

Jack

1. A fixing nut

Open a cover. Turn off a fixing nut and get a jack.

The jack handle

Get the handle of a jack from a clip and get it from branch for tools.

1. The holder

Having pressed a springing ring, get the handle.

Having pressed on a springing ring, collect the handle.

Tools

1. Branch for tools
2. Flat-nose pliers
3. A key of the top hatch (for cars with the top hatch)
4. A screw-driver
5. Гайковерт
6. Ломик
7. A small lamp
8. A key for removal of the cap closing nuts of fastening of a wheel
9. A wrench (big)
10. A wrench (small)

Spare wheel

1. Ломик

2. Гайковерт

The spare wheel is established on вня шней to the party of a back door.

In some models, for the theft prevention, one of bolts of fastening of wheels has the small lock.

To remove the lock, insert a key into a crack of the lock and remove it from a bolt.

Turn off bolts of fastening of a spare wheel with the help гайковерта.

Insert ломик into apertures гайковерта at untwisting of bolts of fastening of a wheel. Remove a spare wheel

When on a hook (1) there is no spare wheel, pull out a hook and lift it upwards in a special aperture for its storage.

For installation of the removed wheel. Lower a hook of fastening of a spare wheel and establish on it the removed wheel. Combine apertures for bolts in a wheel with apertures on a fixing arm and insert bolts of fastening of a spare wheel.

The prevention

Before installation of a wheel of the car on a fixing arm of a spare wheel, check up, that the hook of fastening of a spare wheel has been lowered.

With the help гайковерта tighten bolts of fastening of a wheel. For lock installation on one of bolts, will put the lock with the inserted key on a bolt head as it is possible further. Then, close the lock, having got from it a key.

The prevention

The spare wheel should be reliably fixed at car movement. At installation of a spare wheel instead of the lowered wheel, establish the lowered wheel on an arm of fastening of a spare wheel and reliably twirl fixing nuts.

Поддомкрачивание and wheel replacement

Points of installation of a jack

A.Perednjaja a point of installation of a jack

If car lifting at jack installation in a point And insufficiently, use a point of Century

S.Zadnjaja a point of installation of a jack

Before car installation on a jack, put the car on a lay brake. On cars with a mechanical transmission translate the gear change lever in position of neutral transfer. On cars with an automatic transmission include парковочную transfer Р and turn a key in the ignition lock in position LOCK.

Establish a jack under one of points for installation of the jack, shown on drawing. Use a point of installation of the jack, the nearest to a replaced wheel, or to a wheel on which it is necessary to establish chains for improvement of coupling with road.

The prevention

Check up, that the jack has been established on a dense surface.