Cars without a screen wiper of back glass
The lever of inclusion of screen wipers
|
|
OFF – screen wipers are switched off
INT – faltering work of screen wipers
1 – slow work of screen wipers
2 – fast work of screen wipers. |
|
|
1. Quickly
2. Slowly
3. The adjusting handle |
Windscreen screen wipers can be included by means of the lever of inclusion of screen wipers when the key in the ignition lock is in position ON or АСС.
Cars with a screen wiper of back glass
The lever of inclusion of screen wipers
|
|
OFF – screen wipers are switched off
INT – faltering work of screen wipers
1 – slow work of screen wipers
2 – fast work of screen wipers. |
|
|
1. Quickly
2. Slowly
3. The adjusting handle |
On cars with system of adjustment of faltering movement of screen wipers the interval of their work can be changed from 2 to 15 with, rotating the adjusting handle.
Turn the handle on itself to increase work intervals.
Clear brushes of screen wipers and car glass a soft washing-up liquid to remove an oil film from glass and to provide good work of screen wipers, without a scratch and jerks.
The prevention Before muffling the engine, always switch off screen wipers and wait, while they will return to a starting position, especially at cold weather. If screen wipers not to return in парковочное position, and to leave on glass in case they will freeze to a windshield, the engine of screen wipers can be damaged at its following start.
Before inclusion of screen wipers in cold weather check up, that they have not frozen to a windshield. If to include screen wipers in such conditions, the engine of screen wipers can fuse.
Do not include screen wipers, when glass dry: they can scratch glass. It also can lead to premature deterioration of brushes.
Replace brushes of screen wipers when they will wear out that visibility of road to rainy weather did not decrease. Use brushes of the suitable size. If you have questions, address to experts.
|
