Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
- 9. A running part
+ 9.1. A mechanical transmission
- 9.2. Coupling
9.2.1. Coupling adjustment
9.2.2. A coupling pedal
9.2.3. Details тросового a drive of deenergizing of coupling
9.2.4. Coupling with a hydrodrive
9.2.5. Removal and coupling installation
9.2.6. The main cylinder of coupling
9.2.7. The working cylinder of deenergizing of coupling
9.2.8. Removal of air from a coupling hydrodrive
+ 9.3. Automatic transmission
+ 9.4. The back bridge
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes
|
Coupling pedal (тросовый a drive)
|
1. A switch socket
Braking signal
2. A spring
3. Шплинт
4. A washer
5. An axis
6. A cable tip
7. An arm
8. The lever
9. A pedal
|
10. An axis of a pedal of a brake
11. A brake pedal
12. The signal switch
Braking
13. A terminator bolt хоа
14. The plug
15. Шплинт
16. A cable
17. The plug
And. To grease |
Pedal couplings (hydrodrive), for а/м 1989-90 with the engine of 2,6 l
|
1. A spring
2. Расшплинтуйте a plug axis
3. A washer
4. A plug axis
5. An arm
6. An axis
|
7. A pedal
8. The face plug
9. The axis plug
And. To grease
N – to replace at assemblage |
Coupling pedal on а/м 1990-91, engine of 3,0 l
|
1. Расшплинтуйте a plug axis
2. Remove a spring
3. An arm
4. Шплинт
5. The plug
6. A bolt of the terminator of a course
7. The gauge of deenergizing of coupling
8. Шплинт
9. A washer
|
10. A plug axis
11. A bolt
12. A pedal
13. The face plug
14. The axis plug
15. A pedal overlay
And. To grease
N – to replace at assemblage |
Coupling pedal on а/м 1992-95
|
1. Расшплинтуйте a plug axis
2. Disconnect the main cylinder that of an arm (one of nuts is from a motor compartment)
3. A pedal in gathering
4. A plug axis
5. An earring And
6. A spring
7. An earring In
8. The plug
9. A pedal axis
10. A pedal
|
11. The face plug
12. The axis plug
13. Plugs
14. An overlay
15. A bolt of the terminator of a course (on а/м without the cruise-control)
16. The gauge of inclusion of coupling (on а/м with cruise-control system)
17. The blocking switch
18. An arm
And. To grease
N – to replace at assemblage |
Removal and installation
CARS WITH ТРОСОВЫМ THE COUPLING DRIVE
| PERFORMANCE ORDER |
| 1. Release a nut of a cover of a cable that the weak point was formed. |
| 2. Disconnect a cable from a pedal. |
| 3. Turn away a nut and remove the pedal lever, having designated its position. |
| 4. Remove a pedal with an axis, having tracked for safety of the plug of an axis. |
| 5. Installation is carried out upside-down. |
| 6. Grease necessary points. |
|
CARS WITH THE COUPLING HYDRODRIVE
Cars 1989-90, engine of 2,6 l
Cars 1990-91, engine of 3,0 l
Cars 1992-98
| PERFORMANCE ORDER |
| 1. A removal order (according to numbering of positions) coupling pedals on cars 1992-98 look at fig. a coupling Pedal on а/м 1992-95 |
| 2. At installation grease the specified places and tighten all connections according to the demanded moments. |
| 3. Adjust a pedal (subsection 9.1.2 see). |
|
|
|
