Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
- 9. A running part
   - 9.1. A mechanical transmission
      9.1.1. The mechanism of management of a check point
      9.1.2. The gauge of deenergizing of coupling (1990-98)
      9.1.3. The gear change lever (and / m 4х4)
      9.1.4. The switch of a signal of movement by a backing
      9.1.5. An epiploon of a shaft of a check point (or a leading shaft of a distributing box)
      9.1.6. Removal and check point installation
   + 9.2. Coupling
   + 9.3. Automatic transmission
   + 9.4. The back bridge
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes


9.1.2. The gauge of deenergizing of coupling (1990-98)


Adjustment of height of a pedal and free course

1. Without the cruise-control

2. With cruise-control system

3. A counternut

4. The gauge

5. A bolt

1. Check up height of a platform of a pedal of coupling And and a rod course In the main cylinder which 180,5–190,5 mm and 1–3 mm at measurement on a pedal pillow should be, accordingly.
2. If necessary adjust these sizes, having executed the following.
3. On cars without the cruise-control the size And establish, rotating a bolt at the released counternut.
4. On cars with cruise-control system disconnect a socket and establish the size And, rotating the gauge case at the released counternut.
5. The free course of a rod In is regulated by rotation of a rod of the main cylinder of a drive of coupling at the released counternut, thus a rod against the piston of the cylinder not to rest.
6. Be convinced, that a free course of a pedal (C) (the distance on which moves a pedal to sensation of considerable resistance to a course) and pedal height at full deenergizing of coupling (D) correspond to norm.
7. A free course: а/м 1992-98 – 6–13 mm, а/м 1990-91 – 8–16 mm. Pedal height – not less than 35 mm.
8. If free the course and pedal height mismatch norm the reason is air hit in a hydrodrive, deterioration of coupling or the main cylinder.