Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Митсубиси Паджеро
- 1.1. The instrument panel and control means
   1.2. Internal furnish
   + 1.3. Door-locks
   1.4. A bulk mouth of a fuel tank
   1.5. A cowl
   + 1.6. Windows
   + 1.7. The hatch
   - 1.8. Seats and seat belts
      + 1.8.1. Adjustment of a forward seat
      + 1.8.2. A back seat
      1.8.3. Folding of seats
      1.8.4. Раскладывание seats
      1.8.5. Headrests
      + 1.8.6. Seat belts
   + 1.9. A safety air cushion
   + 1.10. Devices and controls
   + 1.11. Start of the engine and a driving
   + 1.12. The ignition lock
   1.13. Anticreeping system
   1.14. The lock of a steering column
   1.15. Engine start in cold weather
   + 1.16. An automatic transmission
   + 1.17. A mechanical transmission
   1.18. A lay brake
   1.19. A brake pedal
   1.20. System of the hydraulic booster of brakes
   1.21. The sound signal warning about deterioration brake колодок
   1.22. System of antiblocking of brakes
   1.23. The lever of adjustment of height of a steering column
   1.24. System of a steering with hydraulic strengthening
   1.25. Rear-view mirrors
   1.26. Heaters of rear-view mirrors
   1.27. Cruise-control system
   1.28. Adjustment of volume and air direction
   1.29. The Heater / the conditioner
   1.30. The conditioner switch
   1.31. Salon heating
   1.32. Heating of a windscreen and glasses of doors
   + 1.33. In case of an emergency
   1.34. Replacement of lamps
   1.35. Capacity of lamps
   + 1.36. Headlights of head light
   1.37. Lamps of illumination of back licence plate
   1.38. A lantern of illumination of a luggage carrier
   1.39. Lamps for reading of cards
   1.40. The top plafond
   1.41. The top lantern of a stoplight
   1.42. A portable lantern
   1.43. Safety locks
   + 1.44. Identification numbers and information tablets
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes




ccf2698e

1.8.4. Раскладывание seats

THE GENERAL DATA

Lobbies and back seats


PERFORMANCE ORDER
1. Supporting the combined seat, disconnect a hook from the handle.
2. After you have slowly lowered a seat, strongly press it to fix it on a place.

The prevention

After you have disconnected a hook, turn seats, and legs will automatically decay.


3. Pull adjusting рычажок, located sideways seats, and lift a back.

The prevention

Be convinced, that seat legs have decayed. If they have not decayed automatically, spread out their hands.

After you have combined a seat or have established it in initial position, slightly pull a seat back back and forth to check up, whether the seat is well fixed.


Type 1 (seats with manual adjustment)

PERFORMANCE ORDER
1. Remove headrests from forward seats and insert them into apertures for storage which are located in the bottom part of a back seat.
2. Completely cast away back back of a back seat.
3. Having combined backs of forward seats, shift forward seats completely forward.
4. Completely cast away backs of forward seats.

Type 2 (a seat with automatic adjustment)

PERFORMANCE ORDER
1. Remove headrests from forward seats and insert them into apertures for storage which are located in the bottom part of a back seat.
2. Completely cast away back back of a back seat.
3. Cast away a back of a forward seat so that it adjoined to a pillow of a back seat.
4. Move a forward seat completely forward and cast away a back up to the end. The forward passenger seat can be spread out in the same way, as well as driver's.

The prevention

At first cast away a seat back, and then move a seat forward. If the seat back is in vertical position the seat cannot be shifted forward completely.

To return the spread out seat in initial position, lift a back of a forward seat. Cиденье will automatically move on 9 see Be cautious and do not pinch a hand or a foot.



Returning of seats in initial position

Lift backs of forward seats and a back of a back seat, insert headrests on the places.
The prevention

Do not go by the car if backs of seats are completely cast away.

To spread out seats, first of all park the car in a safe place.

Do not go on backs of seats if they are completely cast away.

To check up, that seats are reliably fixed, try to spread out or combine seats.


The third seat (if that is provided) and a back seat

PERFORMANCE ORDER
1. Shift forward seats completely forward.
2. Remove a headrest from the third seat and insert it into apertures for storage. Then press the adjusting lever and combine a seat back forward.
3. Pull the adjusting lever upwards and cast away a seat back back.
4. Remove headrests from a back seat and insert them into apertures for the storage, the pillows of a seat located in the bottom part. Lower a lateral part of a back of a seat, having pulled рычажок a clamp up.
5. Shift a back seat completely forward.
6. Lift the lever to fix a back seat.
7. Pull the lever and completely cast away a back of a back seat.

The prevention

If you throw back a back of a back seat, necessarily lower armrests, differently you can damage them.


8. To return seats in a starting position, return backs of the second and third seats in initial position, then establish headrests.

The prevention

Do not operate the car when backs of seats are completely lowered.

Completely to lower backs of seats, park the car in a safe place.

Do not go on seats after their backs have been lowered.

To check up, that backs of seats are reliably fixed, try to lower or lift them.