Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
- 13. An electric equipment
   13.1. Detection of malfunctions in electric equipment system
   13.2. Pressure check
   13.3. Short circuit detection
   13.4. Check of reliability of grounding
   13.5. Check of integrity of a chain
   13.6. A finding of not closed chain
   13.7. Safety locks
   13.8. Burnt through crosspieces
   13.9. Automatic switches
   13.10. System of safety SRS (a safety pillow)
   + 13.11. A heater
   - 13.12. The conditioner
      13.12.1. The compressor
      13.12.2. The condenser
      13.12.3. The condenser fan
      13.12.4. The auxiliary condenser and the fan
      + 13.12.5. The evaporator
      13.12.6. The conditioner switch
      13.12.7. The block of management of the conditioner
      13.12.8. The broad valve
      13.12.9. A conditioner highway
      13.12.10. Ring уплотнители coolant tubes
   + 13.13. Cruise-control
   + 13.14. An audiosystem
   + 13.15. Cleaners of glasses
   + 13.16. Devices and switches
   + 13.17. Illumination devices
   + 13.18. Accident protection devices of electric chains
+ 14. Electroschemes




ccf2698e

13.12.6. The conditioner switch

THE GENERAL DATA

The switch of the conditioner (1983-91)

1. An air line
2. Clamps
3. Handles
4. Заглушки
5. Facing
6. A socket
7. The switch

On cars of 1992-98 the conditioner switch is mounted on the control panel by a heater (the removal order see in subsection 13.11.3).

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Turn away screws and remove the bottom air line under a box for trifles.
3. Remove handles with рычажков control panels.
4. Remove a box for trifles, having wrung out clamps.
5. Remove заглушки from the central facing, turn away screws and get facing.
6. Disconnect a socket of wires of the control panel.
7. Through an aperture of a box for trifles disconnect a switch socket.
8. Turn away screws and get the switch.