Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
- 13. An electric equipment
   13.1. Detection of malfunctions in electric equipment system
   13.2. Pressure check
   13.3. Short circuit detection
   13.4. Check of reliability of grounding
   13.5. Check of integrity of a chain
   13.6. A finding of not closed chain
   13.7. Safety locks
   13.8. Burnt through crosspieces
   13.9. Automatic switches
   13.10. System of safety SRS (a safety pillow)
   + 13.11. A heater
   - 13.12. The conditioner
      13.12.1. The compressor
      13.12.2. The condenser
      13.12.3. The condenser fan
      13.12.4. The auxiliary condenser and the fan
      + 13.12.5. The evaporator
      13.12.6. The conditioner switch
      13.12.7. The block of management of the conditioner
      13.12.8. The broad valve
      13.12.9. A conditioner highway
      13.12.10. Ring уплотнители coolant tubes
   + 13.13. Cruise-control
   + 13.14. An audiosystem
   + 13.15. Cleaners of glasses
   + 13.16. Devices and switches
   + 13.17. Illumination devices
   + 13.18. Accident protection devices of electric chains
+ 14. Electroschemes

13.12.2. The condenser

THE GENERAL DATA

The prevention

Assort condenser connections, not applying considerable efforts, tighten them not exceeding the set moment. At assemblage replace sealing rings.

Removal and installation

CARS WITH ENGINES OF 2,6 AND 3,0 L (12-KLAPANNYE)

PERFORMANCE ORDER

1. Depressurize a coolant highway in car-care centre.

The one-stage conditioner

2. Remove a forward lattice.

3. Cautiously turn on the union on the condenser. On engines V6 there are 3 connections on the right and 4 connections at the left. On the engine of 2,6 l disconnect a highway on the condenser and disconnect влагоотделитель.

4. Turn away bolts and remove влагоотделитель.

5. Remove the condenser fan.

6. Turn away a bolt and remove the condenser.

7. Installation is carried out upside-down.

8. The union tighten with the moment 24 Н.м.

The two-level conditioner (with 2 condensers in a cooling contour)

9. Remove a facing lattice передка the car.

10. Cautiously turn on the union of tubes on condensers and from an opposite side, turn away bolts and remove влагоотделитель.

11. Remove the condenser fan.

12. Turn away a bolt from an opposite side влагоотделителя and remove the condenser.

13. Disconnect a socket from the auxiliary fan, turn away bolts and remove the second condenser.

14. Installation is carried out upside-down.

15. Replace sealing rings of unions.

16. The union tighten with the moment 24 Н.м.

CARS WITH ENGINES OF 3,0 L (24-KLAPANNYE) AND 3,5 L

PERFORMANCE ORDER

1. Depressurize a coolant highway in car-care centre.

2. Disconnect the battery from weight.

3. Remove a facing lattice передка the car.

4. Remove an arm of the lock of a cowl.

5. Turn away cooler bolts трансмиссионной liquids.

6. Turn away bolts of an oil radiator, remove an arm.

7. Turn away bolts of fastening of the condenser.

8. Disconnect a high pressure tube on the condenser and влагоотделителе.

9. Remove влагоотделитель and an arm.

10. Remove the condenser fan.

11. Disconnect the top hose of a high pressure on the condenser.

12. Remove the condenser and get consolidations.

13. Installation is carried out upside-down.

14. Replace sealing rings of unions.

15. The union tighten with the moment 24 Н.м.