Митсубиси Паджеро
+ 1.1. The instrument panel and control means
- 2. Maintenance service
2.1. Periodicity of service
2.2. Refuelling capacities
2.3. Filter replacement
2.4. The fuel filter
2.5. A ventilation zolotnik картера (petrol engines)
2.6. Care of the battery
2.7. Drive belts
2.8. Hoses of system of cooling
2.9. Covers of SHRUS
2.10. Conditioner service
2.11. Screen wiper brushes
2.12. Wheels and tyres
2.13. Recommended fuel, liquids and lubricants
+ 2.14. The engine
+ 2.15. A cooling liquid
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes
|
The fuel filter on carburettor and инжекторных engines
|
|
At the left – the fuel filter on carburettor engines.
On the right – the fuel filter on инжекторных engines.
|
The fuel filter on engines of 2,6 l
|
|
The fuel filter is specified by an arrow.
|
On carburettor engines the filter is mounted on a frame channel consistently with a gasoline pipe line and fastens to hoses collars.
On инжекторных engines the filter of a high pressure which also is mounted on a channel of a frame is applied and included in a highway through накидные the union.
Before filter removal execute декомпрессию fuel system (subsection 8.2.1 see). In case of strong pollution of the filter remove and wash out a tank. For access to filters it is recommended to lift the car.
CARBURETTOR ENGINES
Replacement
The scheme of connection of a hose
|
|
The hose should come for a branch pipe (it is specified by an arrow) not less than on 25 mm.
|
| PERFORMANCE ORDER |
| 1. Disconnect the battery from weight. |
| 2. Ослабьте collars. |
| 3. Disconnect hoses and get the filter from an arm. |
| 4. Check up a condition of hoses, if necessary replace. |
| 5. Installation is carried out upside-down. Attach hoses in a demanded order. |
|
ИНЖЕКТОРНЫЕ ENGINES
The prevention On a part of cars it is provided лючок the fuel pump, for access to which it is necessary to remove a rug in a cargo compartment and a floor covering. Remove лючок, disconnect a socket and having started the engine, develop the fuel rest. After these actions pressure in fuel system will go down.
Лючок the fuel pump
Replacement
| PERFORMANCE ORDER |
| 1. Execute декомпрессию (subsection 8.2.1 see). |
| 2. Disconnect the battery from weight. |
| 3. Remove the air filter. |
| 4. Turn away bolts of unions and disconnect hoses. |
| 5. Turn away a bolt of fastening and remove the filter. |
| 6. Installation is carried out upside-down. Tighten bolts of unions of final and inlet hoses with the moment 24–34 and 34 Н.м. Accordingly. |
|
DIESEL ENGINE
The replaceable element of the fuel filter is established in a tank which is mounted in a motor compartment.
Replacement
Wires of the fuel pump
|
|
1. A socket
2. The fuel pump
|
The fuel filter of a diesel engine
|
|
1. The pump of manual pumping of fuel
2. The gauge of temperature of fuel
3. A heater
4. A sediment bowl (влагоотделитель)
5. The water level gauge
6. A filtering element |
Correct position of a collar
| PERFORMANCE ORDER |
| 1. Designate and disconnect from a tank with the filter sockets. |
| 2. Spread rags, cautiously disconnect hoses. |
| 3. Turn away bolts of fastening and remove a filter tank. |
| 4. Remove from a tank an arm and a guard. |
|
5. By hand turn out the filter from a tank. Turn out from a filtering element the gauge of a water level and заглушку. |
| 6. It is recommended to replace filtering element. It is possible to be limited to its careful washing in kerosene. |
|
7. Installation is carried out upside-down. Tighten the gauge of a water level and заглушку with the moment 9 and 4 Н.м. Accordingly. Remove air from system in a following order:
– Release a stopper for air removal;
– Turn out заглушку the lever of the pump of manual pumping and extend the lever;
– Pump up fuel before disappearance of vials of air, tighten a stopper;
– Continue to pump up fuel until then not begins rigidity of a course of the lever yet be felt;
– Move and combine the lever.
|
|
Removal of a moisture from the fuel filter of a diesel engine
At fire of a control lamp of a water level in a sediment bowl from the fuel filter it is necessary to remove a moisture.
Removal of a moisture from the fuel filter of a diesel engine
| PERFORMANCE ORDER |
|
1. Turn away a drain stopper in the bottom part of the filter.
2. Turn out заглушку the lever of the pump of manual pumping and extend the lever.
|
| 3. Continue to pump up fuel until then water will not cease to leave yet. |
| 4. Move and combine the lever. |
|
|
|
