Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Митсубиси Паджеро
+ 1.1. The instrument panel and control means
- 2. Maintenance service
   2.1. Periodicity of service
   2.2. Refuelling capacities
   2.3. Filter replacement
   2.4. The fuel filter
   2.5. A ventilation zolotnik картера (petrol engines)
   2.6. Care of the battery
   2.7. Drive belts
   2.8. Hoses of system of cooling
   2.9. Covers of SHRUS
   2.10. Conditioner service
   2.11. Screen wiper brushes
   2.12. Wheels and tyres
   2.13. Recommended fuel, liquids and lubricants
   + 2.14. The engine
   + 2.15. A cooling liquid
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes




ccf2698e

2.10. Conditioner service

THE GENERAL DATA

Correct arrangement of a collar at hose clothing


Viewing glass on the cars filled хладогентом R12


Viewing glass on the cars filled хладогентом R134a


Conditioner service is carried out in a specialised workshop by qualified personnel. In necessity of dismantling, rerefuelling or repair of knots of this system specify appreciable decrease in efficiency of cooling, or strong обмерзание the evaporator.

In a central air coolant R12 or R134а which mixing is not supposed is used.

Check of refuelling of the conditioner by a coolant can be executed independently. The observation port mounted on влагоотделителе, located in a motor compartment is for this purpose provided.

Check

PERFORMANCE ORDER
1. Check is carried out at air temperature nearby 21 ° With (the given check is unacceptable if the car is equipped by the "supernumerary" conditioner).
2. Start the engine.
3. Include the conditioner button pressing, translate рычажок the fan in position HIGH, and рычажок a temperature regulator in extreme left position.
4. After some minutes check up a coolant condition behind viewing glass.
5. If in viewing glass there are no indignations, the compressor is included, a final branch pipe of the compressor warm, and inlet – cold the system is completely filled.
6. If in viewing glass there are no indignations, the compressor is included (has worked magnetic муфта), and distinction of temperature of branch pipes is insignificant, the system is filled. Not completely.
7. If in viewing glass of indignation are absent, and the compressor has not joined (has not worked magnetic муфта) or it is faulty муфта, or in system there is no coolant.
8. If in viewing glass foaming or vials the system requires refuelling are observed, or is polluted влагоотделитель.
9. Hand over the car in car-care centre.
10. Have in an appearance, that foaming or vials are supposed at air temperature above 43 ° With, or more low 21 ° With.