Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
- 2. Maintenance service
   2.1. Periodicity of service
   2.2. Refuelling capacities
   2.3. Filter replacement
   2.4. The fuel filter
   2.5. A ventilation zolotnik картера (petrol engines)
   2.6. Care of the battery
   2.7. Drive belts
   2.8. Hoses of system of cooling
   2.9. Covers of SHRUS
   2.10. Conditioner service
   2.11. Screen wiper brushes
   2.12. Wheels and tyres
   2.13. Recommended fuel, liquids and lubricants
   + 2.14. The engine
   + 2.15. A cooling liquid
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes


2.12. Wheels and tyres


Check of depth of a protector

Check of deterioration and damages of tyres

Care of tyres is reduced to check of depth of a protector, pressure in tyres (it is checked on cold tyres), to revealing of traces of abnormal deterioration and damages on which it is possible to define a condition of details of a forward suspension bracket and a steering.

Regularly delete the stones which have got stuck in a protector or sharp subjects. Periodically remove wheels and clear external and internal surfaces of a disk of a dirt.

If there are doubts concerning consequences of any found out damages address for consultation in шиноремонтную a workshop. Rearrange wheels with certain periodicity. At installation of the new tyre on a disk consider the following.

The width of a protector of the tyre should differ from distance between internal boards of the tyre no more than on 25 mm. On radial tyres the width between internal boards should be no more than 80 % from width of the tyre.

The tyre height in the established condition essentially influences accuracy of indications of a speedometer, on dynamics of dispersal and a car road clearance. Necessary amendments are specified by the manufacturer of tyres. In spare parts reducers of a speedometer with the corrected transfer number are delivered.

At installation of new tyres it should not be observed an abnormal inclination of a body at driving on bumpy road or at turns.

Shift of wheels

The scheme of shift of wheels

Wheels are rearranged for the purpose of increase of uniformity of deterioration of tyres through 12000 km.

At removal winter шипованных tyres designate position of a removed wheel and a direction of thorns. Shift of the wheels which tyres расчитаны on different loadings and are established on forward and back axes separately is not supposed.

The manufacturer recommends to establish radial tyres in the uniform complete set (5 wheels). It is supposed to establish in extreme cases radial tyres of an identical design on a back axis.