Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
- 1.1. The instrument panel and control means
   1.2. Internal furnish
   + 1.3. Door-locks
   1.4. A bulk mouth of a fuel tank
   1.5. A cowl
   + 1.6. Windows
   + 1.7. The hatch
   + 1.8. Seats and seat belts
   + 1.9. A safety air cushion
   + 1.10. Devices and controls
   + 1.11. Start of the engine and a driving
   + 1.12. The ignition lock
   1.13. Anticreeping system
   1.14. The lock of a steering column
   1.15. Engine start in cold weather
   + 1.16. An automatic transmission
   - 1.17. A mechanical transmission
      1.17.1. A regulator of an operating mode of shock-absorbers
   1.18. A lay brake
   1.19. A brake pedal
   1.20. System of the hydraulic booster of brakes
   1.21. The sound signal warning about deterioration brake колодок
   1.22. System of antiblocking of brakes
   1.23. The lever of adjustment of height of a steering column
   1.24. System of a steering with hydraulic strengthening
   1.25. Rear-view mirrors
   1.26. Heaters of rear-view mirrors
   1.27. Cruise-control system
   1.28. Adjustment of volume and air direction
   1.29. The Heater / the conditioner
   1.30. The conditioner switch
   1.31. Salon heating
   1.32. Heating of a windscreen and glasses of doors
   + 1.33. In case of an emergency
   1.34. Replacement of lamps
   1.35. Capacity of lamps
   + 1.36. Headlights of head light
   1.37. Lamps of illumination of back licence plate
   1.38. A lantern of illumination of a luggage carrier
   1.39. Lamps for reading of cards
   1.40. The top plafond
   1.41. The top lantern of a stoplight
   1.42. A portable lantern
   1.43. Safety locks
   + 1.44. Identification numbers and information tablets
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes

1.17.1. A regulator of an operating mode of shock-absorbers

THE GENERAL DATA

Regulator of an operating mode of shock-absorbers

Depending on road conditions or desire of the driver демпфирующую force of shock-absorbers can be established in one of three modes.

The switch of operating modes of shock-absorbers

2. The indicator

The switch of operating modes of shock-absorbers can be involved after the key in the ignition lock will be turned in position ON.

Average mode

It is the recommended mode for a driving in normal road conditions.

Mode of soft work

Include this mode if want that shock-absorbers became softer. This mode is recommended to be included in case of a long trip on highway when it would be desirable to move with the maximum comfort.

Mode of rigid work

Choose a rigid operating mode if you want that shock-absorbers became more rigid. This mode is necessary for using at movement on impassability, at movement with the big cargo or at movement on very twisting road.