Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
- 13. An electric equipment
   13.1. Detection of malfunctions in electric equipment system
   13.2. Pressure check
   13.3. Short circuit detection
   13.4. Check of reliability of grounding
   13.5. Check of integrity of a chain
   13.6. A finding of not closed chain
   13.7. Safety locks
   13.8. Burnt through crosspieces
   13.9. Automatic switches
   13.10. System of safety SRS (a safety pillow)
   + 13.11. A heater
   + 13.12. The conditioner
   - 13.13. Cruise-control
      13.13.1. Check of the main switch
      - 13.13.2. The switch on a steering column
         13.13.2.1. Check of operation of the cruise-control
         13.13.2.2. Dispersal
         13.13.2.3. Braking by the engine
         13.13.2.4. Switching-off and renewal (modes Cancel and Resume)
      13.13.3. The gauge of speed
      13.13.4. The switch of a signal of braking
      13.13.5. The gauge of deenergizing of coupling (and / m from a mechanical check point)
      13.13.6. The blocking switch of an automatic check point
      + 13.13.7. Knots and units of vacuum system of the cruise-control
   + 13.14. An audiosystem
   + 13.15. Cleaners of glasses
   + 13.16. Devices and switches
   + 13.17. Illumination devices
   + 13.18. Accident protection devices of electric chains
+ 14. Electroschemes

13.13.2.2. Dispersal

PERFORMANCE ORDER

1. Speed up.

2. Translate the switch in position Resume.

3. Be convinced, that at switch keeping in this position speed increases, and at отпускании speed of the car remains to constant and equal speed for a moment отпускания the switch.

The prevention

Even if at dispersal speed will reach limiting value of 145 km/h (200 km/hour for а/м 1992-98) dispersal will proceed all the same. After отпускания the switch speed will slowly return to limiting value.