Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
- 13. An electric equipment
   13.1. Detection of malfunctions in electric equipment system
   13.2. Pressure check
   13.3. Short circuit detection
   13.4. Check of reliability of grounding
   13.5. Check of integrity of a chain
   13.6. A finding of not closed chain
   13.7. Safety locks
   13.8. Burnt through crosspieces
   13.9. Automatic switches
   13.10. System of safety SRS (a safety pillow)
   + 13.11. A heater
   + 13.12. The conditioner
   - 13.13. Cruise-control
      13.13.1. Check of the main switch
      + 13.13.2. The switch on a steering column
      13.13.3. The gauge of speed
      13.13.4. The switch of a signal of braking
      13.13.5. The gauge of deenergizing of coupling (and / m from a mechanical check point)
      13.13.6. The blocking switch of an automatic check point
      - 13.13.7. Knots and units of vacuum system of the cruise-control
         13.13.7.1. The electromagnetic valve and a drive
   + 13.14. An audiosystem
   + 13.15. Cleaners of glasses
   + 13.16. Devices and switches
   + 13.17. Illumination devices
   + 13.18. Accident protection devices of electric chains
+ 14. Electroschemes

13.13.7. Knots and units of vacuum system of the cruise-control

13.13.7.1. The electromagnetic valve and a drive

THE GENERAL DATA

Conclusions of the electromagnetic valve of the cruise-control

1. The control valve

2. The pitting valve

Knots of system of the cruise-control

1. A guard
2. A nut of a cable of an accelerator In
3. A nut of a cable of an accelerator And
4. A cable
5. A socket
6. A drive
7. The accelerator switch

8. The switch of a signal of braking
9. The gauge of deenergizing of coupling
10. The switch замедлителя
11. The gauge of speed
12. The cruise-control switch
13–15. Doorway and body overlays
16. The management block

Knots of system of the cruise-control of cars 1992-98

1. A guard
2. An accelerator cable In
3. A cable throttle заслонки

4. A cruise-control cable
5. A side scene
6. An arm

Order of removal of gauges, switches and the block of management of the cruise-control (1992-98)

12. The main switch
13. The bottom overlay of a column
14. Sockets
15. The module of a pillow of safety
16. Operating перелючатель

19. The gauge of speed
20. The switch of a signal of braking
21. The gauge of deenergizing of coupling
22. Blocking switch AKPP
23. The gauge of turn throttle заслонки

THE ELECTROMAGNETIC VALVE

Check

PERFORMANCE ORDER

1. Disconnect a socket from the vacuum pump.

2. Check up resistance between steams of conclusions 1–2 and 1–3 which should be 60 Ohm.

3. Check up valve operation at battery connection between steams of conclusions 1–2 and 1–3.

4. Replace the valve if its work differs from the described.

DRIVE

Check

PERFORMANCE ORDER

1. Disconnect a socket from the vacuum pump.

2. At battery connection between conclusions 1–4 drive should rotate.

3. Otherwise a drive replace

Removal and installation

PERFORMANCE ORDER

1. Disconnect the battery from weight.

2. Remove a drive guard.

Cars 1988-91

3. Release nuts of covers of cables and disconnect cables from a drive.

4. Disconnect from a drive a socket.

5. Turn away 3 nuts and remove a drive.

6. Disconnect wires from an accelerator, the switch of a signal of braking, the gauge of deenergizing of coupling and замедлителя, remove switches.

7. Remove a combination of devices (fig. subsection 13.16 see), remove from a speedometer the gauge of speed.

8. Remove from a steering column the cruise-control switch.

9. Remove an overlay of an aperture of a forward door, an overlay порожка, a lateral casing and the management block.

10. Installation of the removed knots of system is carried out upside-down.

11. Nuts of cables tighten with the moment 8–11 Н.м.

Cars 1992-98

12. Disconnect all cables from a side scene.

13. Turn away 4 nuts and remove a side scene.

14. Turn away a bolt and remove an arm.

15. Disconnect from the vacuum pump a socket and a hose and remove the pump.

16. Turn away 3 nuts and remove a pump arm.

17. Remove a drive.

18. Installation of the removed knots of system is carried out upside-down.

19. Adjust cables, having executed the following.

Accelerator cable

20. Keeping a side scene With and resting against the terminator, turn a nut of a cover of a cable so that the free course of a cable was 2–3 mm, tighten a counternut.

Cable throttle заслонки

21. Keeping a side scene In and resting against a side scene With, turn a nut of a cover of a cable at the released bolt so that the free course of a cable was 1–2 mm, tighten a counternut.

Cruise-control cable

22. Keeping a side scene And and resting against a side scene In turn a nut of a cover of a cable so that the free course of a cable was 1–2 mm, tighten a counternut.