Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
- 10. A suspension bracket and a steering
   10.1. Wheels
   + 10.2. A forward suspension bracket
   + 10.3. A back suspension bracket
   - 10.4. A steering
      10.4.1. Removal and wheel installation
      10.4.2. The block of switches on a column
      10.4.3. The ignition lock
      10.4.4. The lock of blocking of a wheel
      10.4.5. A steering column
      10.4.6. Steering draughts
      10.4.7. The pendular lever
      10.4.8. Average steering draught
      10.4.9. Lateral steering draughts
      10.4.10. The steering mechanism
      10.4.11. The hydraulic booster pump
      10.4.12. Removal of air from the wheel hydraulic booster
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes

10.4.3. The ignition lock

THE GENERAL DATA

The ignition lock in gathering

1. The ignition lock

2. The switch of a reminding signal

Order of removal of the lock of ignition


1. A casing 2. Обвязка	3. The ignition lock 4. The switch of a reminding signal

The timer of illumination of a nest of the lock () and a reminding sound signal ()

The removal-installation order is identical to all cars. On а/м 1992-98 are in addition provided a ring of illumination of a nest of the lock, the timer and a reminding sound signal (are mounted accordingly on the lock, the right and left intensifying arms of a partition of salon).

Removal and installation

PERFORMANCE ORDER

1. Disconnect the battery from weight.

2. On а/м 1992-98 remove the bottom facing of the forward panel of salon.

3. Remove both casings of a steering column.

4. Remove обвязку conductings, disconnect a socket of the lock of ignition through an aperture in a steering column.

5. Turn away 2 screws of fastening of the switch of a reminder on the left key and remove the ignition lock.

6. Installation is carried out upside-down.

Check

PERFORMANCE ORDER

1. Disconnect a socket and check up a chain between conclusions of the lock of ignition according to the scheme and the table.
2. If contacts do not become isolated according to the table the ignition lock replace.

The table for check of isolation of contacts of the lock of ignition at different positions of a key (1983-86)

The table for check of isolation of contacts of the lock of ignition at different positions of a key (1987-91)

The table for check of isolation of contacts of the lock of ignition at different positions of a key (1992-98)