Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
- 10. A suspension bracket and a steering
   10.1. Wheels
   + 10.2. A forward suspension bracket
   + 10.3. A back suspension bracket
   - 10.4. A steering
      10.4.1. Removal and wheel installation
      10.4.2. The block of switches on a column
      10.4.3. The ignition lock
      10.4.4. The lock of blocking of a wheel
      10.4.5. A steering column
      10.4.6. Steering draughts
      10.4.7. The pendular lever
      10.4.8. Average steering draught
      10.4.9. Lateral steering draughts
      10.4.10. The steering mechanism
      10.4.11. The hydraulic booster pump
      10.4.12. Removal of air from the wheel hydraulic booster
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes


ccf2698e



10.4.9. Lateral steering draughts

THE GENERAL DATA

Distance centre to centre draughts at assemblage (1983-91)

1. From average draught

2. From a fist

Distance centre to centre draughts at assemblage (1992-98)

1. From average draught

2. From a fist

Removal and installation

PERFORMANCE ORDER
1. Lift redock of the car and remove wheels.
2. Расшплинтуйте also turn on корончатые nuts of fingers of tips and выпрессуйте fingers with the help вильчатого клинового a stripper from a fist (at the left) and a screw stripper from average draught (on the right).
3. Turn out external tips, having released collars and having counted number of threads of a carving to full отворачивания (the distance centre to centre tips of draughts should be 277–279 mm).
4. Establish draughts upside-down.
5. Tighten nuts of tips of draughts with the certain moments. Replace the details specified by letter N.