Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
- 13. An electric equipment
13.1. Detection of malfunctions in electric equipment system
13.2. Pressure check
13.3. Short circuit detection
13.4. Check of reliability of grounding
13.5. Check of integrity of a chain
13.6. A finding of not closed chain
13.7. Safety locks
13.8. Burnt through crosspieces
13.9. Automatic switches
13.10. System of safety SRS (a safety pillow)
+ 13.11. A heater
+ 13.12. The conditioner
+ 13.13. Cruise-control
+ 13.14. An audiosystem
+ 13.15. Cleaners of glasses
+ 13.16. Devices and switches
- 13.17. Illumination devices
13.17.1. Headlights
13.17.2. Lamp replacement
13.17.3. Adjustment of a beam of light of headlights
13.17.4. Indexes and turn repeaters
13.17.5. A lamp of an additional signal of braking (1992-98)
13.17.6. Devices of internal illumination
13.17.7. A lantern of illumination of licence plate
+ 13.18. Accident protection devices of electric chains
+ 14. Electroschemes
|
Bunch adjustment on a vertical (1992-98)
|
|
1. The screw
2. Labels
3. A vial
4. A scale of the vertical indicator |
Bunch adjustment across (1992-98)
|
|
1, 4. The screw
2. Adjustment
3. A scale of the horizontal indicator
5. A scale
6. A black label
7. A red label |
The sizes for definition of the centre of a headlight
The marked screen
Adjusting screws of a headlight
|
|
Arrows specify fastening screws. |
Position of a light ellipse at the adjusted headlight
|
|
1. A horizontal of the centre of a headlight
2. A vertical of the centre of a headlight
3. The ellipse centre
4. A zone of high light exposure |
CARS 1992-98
On these cars the bunch is necessary for adjusting only after headlight removal, this procedure does not concern to obligatory, carried out as current maintenance service.
| PERFORMANCE ORDER |
| 1. Establish the car on an equal platform, pump over a suspension bracket. |
| 2. Pressure in tyres should correspond to norm, the tank should be completely filled (imitation by cargo from calculation of fuel of 0,8 kg/l) is supposed, and the seat of the driver is loaded by weight 70 kg. |
| 3. Clear headlights. |
| 4. Adjust a vertical corner of a bunch for what rotating the adjusting screw, achieve that the vial of a vertical goniometer was established between two adjusting labels. The vertical corner at turn on 1 division varies on 12. |
| 5. Adjust a bunch across for what rotating the adjusting screw, achieve combination of red and black labels of the indicator. The corner across at turn on 1 division varies on 23 `. |
| 6. If the bunch cannot be adjusted in such a way address in car-care centre. |
|
OTHER CARS
The bunch is regulated with use of the marked screen.
| PERFORMANCE ORDER |
| 1. Establish the car on an equal platform in 3 m from the screen, pump over a suspension bracket. |
| 2. Pressure in tyres should correspond to norm, the tank should be completely filled (imitation by cargo from calculation of fuel of 0,8 kg/l) is supposed, and the seat of the driver is loaded by weight 70 kg. |
| 3. Clear headlights. |
| 4. Define the headlight centre on a marking and will draw (paste) перекрестия which centres settle down opposite to the centres of headlights. |
| 5. Rotating adjusting screws, establish a light ellipse of a passing light of headlights as it is required. Headlight adjustment thus is not required. |
|
|
|
