Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
- 10. A suspension bracket and a steering
   10.1. Wheels
   + 10.2. A forward suspension bracket
   - 10.3. A back suspension bracket
      10.3.1. Removal and installation of springs (1989-98)
      10.3.2. Removal and installation of springs (1983-89)
      10.3.3. Shock-absorbers of a back suspension bracket
      10.3.4. The back stabilizer of cross-section stability
   + 10.4. A steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes

10.3.2. Removal and installation of springs (1983-89)

THE GENERAL DATA

Correct installation of bolts of an earring of a spring

PERFORMANCE ORDER

1. Remove back wheels, disconnect a cable of a manual brake.

2. Substitute under the bridge 2 jacks, disconnect from the bridge shock-absorbers.

3. Turn away a nut of step-ladders, turn on and get bolts of a back earring and a forward bolt of a spring, remove a spring.

4. Installation is carried out upside-down.

5. Bolts of fastening of a spring should be turned heads outside.

6. Tighten nuts of step-ladders with the moment 100–120 Н.м., a shock-absorber bolt – with the moment 18–25 Н.м. (After car lowering), a nut of a forward bolt of a spring – with the moment 140 Н.м., nuts of an earring 45–60 Н.м.