Mitsubishi Pajero

1982-1998 of release

Repair and car operation

Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
- 4. Cooling system
   4.1. Introduction
   4.2. The electrofan
   4.3. Replacement of a cooling liquid
   4.4. The water pump
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
+ 13. An electric equipment
+ 14. Electroschemes


4.4. The water pump


1. Disconnect a mass wire from the storage battery.
2. Merge cooling liquid.
3. Remove directing casing of the fan.
4. Remove bringing hose of a radiator.
5. Remove a belt of a drive of the pump of the hydraulic booster of a steering and a belt of a drive of the generator.
6. Remove the fan and вязкостную муфту.
7. Remove a pulley of the water pump.
8. Remove taking away hose of a radiator.
9. Remove the bottom and top covers of a drive газораспределительного the mechanism.
10. Remove belts of a drive of distributive and counterbalancing shaft.
11. Remove the pump of the hydraulic booster of a steering and its arm.
12. Remove the case of the thermostat and the thermostat.
13. Remove the water pump.

Check of a technical condition

1. Clear and check up a condition привалочных surfaces of the water pump and the block of cylinders.
2. Replace linings of the thermostat, the water pump and a pump epiploon, and also collars of hoses.
3. Check up, whether is not present подтеканий from вязкостной муфты.
4. Check up a condition of a belt of a drive of the generator.


1. Installation of the water pump is made in an order, the return to removal.
2. After installation of the water pump adjust a tension of a belt of a drive of the generator.

The prevention

For simplification of installation of an epiploon moisten with its water. It is forbidden to apply oil or greasing in these purposes.