Mitsubishi Pajero

1982-1998 of release

Repair and car operation



Митсубиси Паджеро
+ 1.1. The instrument panel and control means
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Greasing system
+ 6. The power supply system
+ 7. Release system
+ 8. Fuel system
+ 9. A running part
+ 10. A suspension bracket and a steering
+ 11. Brake system
+ 12. A body
- 13. An electric equipment
   13.1. Detection of malfunctions in electric equipment system
   13.2. Pressure check
   13.3. Short circuit detection
   13.4. Check of reliability of grounding
   13.5. Check of integrity of a chain
   13.6. A finding of not closed chain
   13.7. Safety locks
   13.8. Burnt through crosspieces
   13.9. Automatic switches
   13.10. System of safety SRS (a safety pillow)
   - 13.11. A heater
      13.11.1. The fan electric motor
      13.11.2. A heater radiator
      13.11.3. The control panel a heater and the block switch обдува
      13.11.4. Cables of management of a heater
   + 13.12. The conditioner
   + 13.13. Cruise-control
   + 13.14. An audiosystem
   + 13.15. Cleaners of glasses
   + 13.16. Devices and switches
   + 13.17. Illumination devices
   + 13.18. Accident protection devices of electric chains
+ 14. Electroschemes


ccf2698e



13.11.2. A heater radiator

THE GENERAL DATA

The forward panel of salon (1987-91)
1. The bottom cover of an air line In
2. The bottom cover of an air line With
3. An arm of a cable of a drive
The cowl lock
4, 5. Lateral ventilating windows
6. A box for trifles
7. A cover of a guard of devices
8, 9. The case of a guard of devices
10. A skeleton of devices
11. The central panel
12. An air line
13. A switching cable
Ventilation mode
14. A cable of the crane of a heater
15. The central skeleton
16. The button of a sound signal
17. A wheel
18, 19. A cover and the block
Safety locks
20. The panel

Heater (1987-91)
1. Hoses
2. The panel
3. An air line
4. The central air line
5. A heater

The floor panel (1992-98)
1. The panel with switches
2. The suspension bracket switch (or заглушка)
3, 8. A socket
4. The lateral panel And
5. Back section
6. The handle of the lever of a check point
7. The handle of the lever of a distributing box
9. Forward section
10. For а/м from a mechanical check point
11. For а/м from an automatic check point
12. Back section of box-shaped type
13. Back section лоточного type

The forward panel of salon (1992-98)
1. The handle of a drive of the lock of a cowl
2. The handle of a drive of a door of a jellied mouth
3. The bottom cover of the forward panel
4. An angular cover of the forward panel
5. A clamp of a box for trifles
6. A box for trifles
7. The central panel And
8. The control panel a heater
9. A radio tape recorder
10. Заглушка facings of a guard of devices
11. Facing of a guard of devices
12. A guard of devices
13. An adapter of a cable of a speedometer
14. A casing of a steering column
15. Hours
16. A lateral nozzle
17. The mirror switch
18. Динамик
19. A rheostat
20. The switch of a cleaner and a washer of back glass
21. The door-lock switch
22. A drive cable заслонки an air inlet
23. A socket
24. Bolts of a steering column
25. The forward panel of facing of salon

Heater (1992-98)
1. Шланки
2, 3. Air lines of niches for feet
4. An air line And
5. A bolt and an evaporator nut
6. Connecting section
7. The central air line
8. A skeleton
9. A heater
10. A distributive box
11. A radiator

CARS 1983-86

PERFORMANCE ORDER
1. Merge a liquid from cooling system, having moved рычажок the crane отпителя in completely open position.
2. Disconnect from a heater hoses.
3. Disconnect the battery from weight.
4. Remove a wheel, the central section of the forward panel, a guard of devices, cautiously disconnect a speedometer and wire cable.
5. Remove a combination of devices.
6. Remove the bottom covers of an air line under the forward panel and a cable arm.
7. Remove the control panel a heater, having designated cables at a detachment from the crane and заслонок.
8. Remove a cover of the block of safety locks, turn away bolts and push the block under the forward panel.
9. Disconnect wires from lobbies динамиков.
10. Remove заглушку in the centre of the forward panel.
11. Cautiously wring out latches and remove nozzles обдува a windscreen.
12. Remove a box for trifles.
13. Disconnect wires from the heater relay.
14. Turn away a nut and bolts and remove the forward panel.
15. Remove the central air line and an air line обдува a windscreen.
16. Remove an air line of heating of back glass.
17. Turn away the top and bottom nuts and remove the heater case.
18. Remove a radiator, preliminary having removed all necessary details (draught, the lever and the gate). Теплоизоляционную a lining leave on a place.
19. Installation is carried out upside-down.
20. Draught of the lever of the central air line fix, having turned the lever clockwise.
21. Attach draught делительной заслонки, having translated заслонку in position of heating of a windscreen and having turned the lever counter-clockwise.
22. Draught of the crane attach at completely covered the crane of a radiator and заслонке воздухопритока.

CARS 1987-91

PERFORMANCE ORDER
1. Merge a liquid from cooling system, having moved рычажок a temperature regulator in completely open position.
2. Designate and disconnect from a heater hoses.
3. Disconnect the battery from weight.
4. Remove the bottom covers of air lines under the left and right parts of the forward panel and an arm of a cable of a drive of the lock of a cowl.
5. Remove a box for trifles.
6. Remove lateral ventilating nozzles, having wrung out latches.
7. Hook and remove a back cover of an average combination of devices.
8. Remove a guard of devices, designate and disconnect wires from devices and switches and a speedometer cable.
9. Turn away lateral screws and remove a cover of a combination of devices.
10. Turn away 4 screws in the basis and get a skeleton with devices, having disconnected wires.

The prevention

Уклономер it is possible to damage easy blows or at its falling. Do not incline the device so that the arrow left for scale edge.


11. Remove an overlay of the central section or the bottom panel.
12. Designate and disconnect 3 cables of management of a heater.
13. Remove the central skeleton together with the receiver, disconnecting wires.
14. Remove a wheel.
15. Remove a cover of the block of safety locks and get the block.
16. Turn away a nut and bolts and remove the forward panel of facing of salon.
17. After panel removal access to a heater is provided.
18. Remove скобы heater fastenings to air lines.
19. Turn away bolts of fastening of a heater.
20. Remove a heater.
21. Remove the central air line and an air line of heating of a windscreen.
22. Turn away cover screws on a radiator.
23. Remove a cover from a radiator.
24. Remove an air line of heating of back glass, turn away the top and bottom nuts and remove a heater radiator in gathering with a casing.
25. Remove the lever and a crane cover.
26. Remove the crane and a branch pipe. For removal of the crane of a heater remove скобу (1), draught (2), a collar (3), a hose (4) and turn out the screw (5).
27. Disconnect draught and remove the lever делительной заслонки.
28. Get a radiator. To get a radiator remove draught (1) заслонки a distributive box of a stream a foot niche / glass. Теплоизоляционную a lining leave on a place.
29. Installation is carried out upside-down.
30. All draughts attach at completely closed заслонках or the heater crane, the lever делительной заслонки air stream to a foot niche / on a windscreen should be turned counter-clockwise.

CARS 1992-98

PERFORMANCE ORDER
1. Merge a liquid from cooling system.
2. Disconnect the battery from weight.
3. Remove floor section, having executed the following.
4. Remove the panel with switches and the suspension bracket switch (or заглушку).
5. Disconnect a socket from the back party.
6. Remove the lateral panel And.
7. Turn away 4 screws and remove back section of the floor panel.
8. Turn out handles of levers of a check point and a distributing box.
9. Disconnect from the floor panel of a wire.
10. Disconnect from the floor panel of a wire.

The prevention

At performance of these works do not touch the block of diagnostics of pillows of safety.


11. Remove the forward panel of facing of salon, having executed the following.
12. Remove handles of a drive of the lock of a cowl and a door of a jellied mouth.
13. Turn away screws and remove the bottom and angular covers.
14. Remove a box for trifles.
15. Turn away screws and remove the average panel And.
16. Remove a heater.
17. Remove a radio tape recorder.
18. Get заглушку facings of a guard of devices, turn away screws and remove facing.
19. Turn away screws and remove a guard of devices.
20. Remove a speedometer cable, having disconnected it at first on a check point, and then having removed an adapter, having submitted a cable on itself, and having removed a clamp.
21. Turn away 4 screws and remove a casing of a steering column.
22. Remove hours (or заглушку).
23. Remove a lateral nozzle, the mirror switch, динамик, the switch of a cleaner and a washer of back glass and the door-lock switch.
24. Disconnect a cable заслонки an air line and conducting.
25. Turn away screws and remove the forward panel.
26. Disconnect from a heater hoses.
27. Remove the bottom covers of an air line under the forward panel.
28. Remove a cover of the channel And cold air.
29. On а/м with the conditioner turn away bolts and a nut of fastening of the evaporator, on а/м without the conditioner remove transitive section of an air line.
30. Get the central air line and two skeletons.
31. Remove a heater, a distributive box for heating of feet.
32. Turn away bolts and remove a heater radiator.
33. Installation is carried out upside-down. Attach an air inlet cable.
34. At installation of a cable of an air inlet rearrange sector of direct giving of cold air and the lever on a heater in position "is closed" (1 – it is closed, 2 – it is opened, 3 – the terminator, 4 – from a heater).