Mitsubishi Pajero
1982-1998 of release
Repair and car operation
Митсубиси
Паджеро
+
1.1. The instrument panel and control means
+
2. Maintenance service
+
3. Engines
+
4. Cooling system
+
5. Greasing system
+
6. The power supply system
+
7. Release system
+
8. Fuel system
+
9. A running part
+
10. A suspension bracket and a steering
-
11. Brake system
11.1. Technical characteristics
11.2. The vacuum amplifier of brakes
11.3. Adjustment of brakes
11.4. The switch of a signal of braking
11.5. Removal and pedal installation
11.6. The main cylinder of brakes
11.7. The dosing out valve
11.8. A regulator of pressure of back brakes (1992-98)
11.9. The control valve of the amplifier of brakes
11.10. Hoses and tubes
11.11. Removal of air from a hydrodrive of brakes
+
11.12. Forward disk brakes
-
11.13. Back drum-type brakes
11.13.1. Brake drums
11.13.2. Replacement
колодок
11.13.3. The wheel cylinder of back brakes
11.13.4. A board of a back drum-type brake
+
11.14. Back disk brakes (1992-98)
+
11.15. A manual brake
11.16. Antiblocking system (ABS)
11.17. The hydromodule
11.18. The overload gauge
11.19. The gauge of speed
+
12. A body
+
13. An electric equipment
+
14. Electroschemes
11.13.4. A board of a back drum-type brake
Removal and installation
PERFORMANCE ORDER
1.
Remove drums,
колодки
, the wheel cylinder (
subsection 11.13
,
subsection 11.13.2
,
subsection 11.13.3
see
) and
полуось
(
subsection 9.4.1
see
).
2.
Turn away 4 bolts and remove a brake board.
3.
At assemblage tighten bolts of fastening of a board with the moment 50–60
Н.м
.
